Karl Mayer Pattern No.242/02
Below please find important instructions for the processing of PES dtex 33 in the ground guide bars:
In order to ensure an optimum processing of PES dtex 33 in the guide bar positions GB 2 (pillar stitch) and GB 3 (weft), it is necessary to replace the tongue unit (No. 18-67-29). Besides, it is imperative to avoid a high strain (load) on the pillar stitch. Therefore, it is recommended to use a yarn tension compensating device at the rotating tension bars for the Jacquard yarns.
Moreover, when processing this material make sure to adjust the machine speed to the respective machine width and gauge.
This development suggestion is intended for your information and guidance and is without obligation.
No guarantee or liability of any kind can be undertaken.It is not our intention to infringe any existing patent rights.
(Lapping Lay-out No.S-4003213,JFP 13/113/112/21/03,Design No.J/8206)
From a Jacquard Raschel Machine with four guide bars (Three in operational),one of which being a Piezo-Jacquard bar,consisting of two split Piezo-Jacquard bars,three ground guide bars,fall plate,
The very delicate net curtain fabric, dyed silvery-Grey and with case patterning, is fascinating by its ease and transparency. The structures in the patterned squares are reminiscent of artificial animal fur, whereas the spacings are without design. This net curtain is extremely lightweight (42 g/M2), has a soft handle (drape) and excellent draping properties.Below please find important instructions for the processing of PES dtex 33 in the ground guide bars:
In order to ensure an optimum processing of PES dtex 33 in the guide bar positions GB 2 (pillar stitch) and GB 3 (weft), it is necessary to replace the tongue unit (No. 18-67-29). Besides, it is imperative to avoid a high strain (load) on the pillar stitch. Therefore, it is recommended to use a yarn tension compensating device at the rotating tension bars for the Jacquard yarns.
Moreover, when processing this material make sure to adjust the machine speed to the respective machine width and gauge.
This development suggestion is intended for your information and guidance and is without obligation.
No guarantee or liability of any kind can be undertaken.It is not our intention to infringe any existing patent rights.
Pattern (finished fabric) | ||||
Stitch courses | : | 19/cm (set :18.8/cm) | ||
Weight | : | 42 g/m2 | ||
Finished fabric | : | 94 % of the knitting width | ||
Finishing | : | Washing,setting,drying,dyeing, | ||
stentering. | ||||
Machine | ||||
Machine | : | RJPC 4 F NE | ||
Machine gauge | : | E 18 (nd./25.4 mm=1") | ||
Machine width | : | 130" (330 cm) | ||
No. of guide bars | : | 3 | ||
No of pattern disks | : | 2 | ||
Number of chain link | 16 | |||
Number of pins | : | 16 | ||
Chain link per course | 4 | |||
Machine speed | 620 rpm, prod finish : 19.6 running m/h | |||
Material specification | Percentage of | Run-in per rack | ||
Material | ||||
JBT 1.1 | dtex 76 f 48x2,polyester,textured,bright,shaped | 28.26 % | 1030 mm/rack | |
JBT 1.2 | dtex 76 f 48x2,polyester,textured,bright,shaped | 28.26 % | 1030 mm/rack | |
GB 2 | dtex 33 f 18 ,poyester,flat semi-dull | 22.87% | 960 mm/rack | |
GB 3 | dtex 33 f 18 ,poyester,flat semi-dull | 20.61% | 865 mm/rack | |
Lapping | Threading | |||
JBT 1.1 | 0 - 1 / 3 - 2 // | fully set | ||
JBT 1.2 | 0 - 1 / 3 - 2 // | fully set | ||
GB 2 | 0 - 1 / 1 - 0 // | fully set | ||
GB 3 | 0 -0 / 2 - 2 // | fully set |